Mennah Oxygen Stain Remover & Whitener for Clothes, 750 Gram

• Free of salts, chlorine, colors, and perfumes
   
• Sanitizes and disinfects clothes
• Removes unpleasant odors from fabrics
• Hypoallergenic for people with detergent allergies
• Protects washing machines from wear and tear
• More economical than traditional detergent
• Mennah® Oxygen Laundry Detergent
• Package size: 750 grams
• Washing capacity: 15 washes
• Suitable for automatic, semi-automatic, and soaking machines
• Suitable for short cycles for colored clothes and long cycles for white clothes

How to use:
 

Automatic washing (automatic or semi-automatic machine):

• Separate colored and white clothes.
• For a small load of 4 kilograms of laundry, use 1 tablespoon of Menna Oxygen.
• For a large load of 8 kilograms of laundry, use 2 tablespoons of Menna Oxygen.

Pre-soaking:

• Separate colored and white clothes.
• Use 1 tablespoon of Mennah® Oxygen in 2 liters of warm or hot water. Soak the laundry for 1 hour, then rinse it well with water.
• Wear gloves to avoid direct contact with your hands due to the strength of the oxygen and active ingredients.

General stain removal:

• Make a solution using 1 tablespoon of Mennah® Oxygen with 500 ml of warm water for all fabrics, textiles, kitchen floors, cabinets, trash cans, and all other surfaces.
• Use the solution to remove stains. Wait 1-5 minutes. Rub it with a sponge, then wipe it with a cloth. Rinse it well and let it dry.

Carpet stain remover:

• Make a solution using 1 tablespoon of Mennah® Oxygen with 500 ml of warm water. Use only enough to cover the stain area. Wait 1-5 minutes. Repeat if necessary. Rinse it well with water and let it dry or vacuum it dry.

Oven grease, oil, and dirt remover:

• Make a solution using 1 tablespoon of Mennah® Oxygen with 500 ml of warm water. Spray it on the surface of the oven to be cleaned. Let it sit for 5 minutes for the oxygen to react with the grease and break it down. Then, scrub the surface with a sponge. Rinse the surface well with a damp cloth, then dry it with a dry cloth.

When the washing machine needs cleaning, add 2 tablespoons of Mennah® Oxygen to the empty washing machine and run a hot water cycle. Your washing machine will be like new again.
 

Warnings:

• After each use, dispose of the remaining solutions you have prepared for cleaning.
• Make sure it does not come into direct contact with your hands, due to the strength of the active ingredients of oxygen and other abrasive cleaning substances.
• Menna Oxygen should not be mixed with products containing chlorine, ammonia, or any other chemicals.
• Avoid inhaling it.
• Avoid contact with the eyes, face, and hands during mixing.
• Keep tightly closed and dry until use.
• After mixing, the solution should not be left.
• Dispose of unused solution.

Caution: 

• Like any other laundry detergent, it can irritate the skin and eyes.

First aid:

• May cause skin and eye irritation.
• If it gets into the eye; rinse with water for 10 minutes.
• Wash the skin with soap and water. If swallowed; drink plenty of water.
• Do not induce vomiting.
• Seek medical attention.
• Keep out of reach of children.

Caution: 

• Always test it on a small area of any surface or material before use.

Here are some additional details about the warnings:

• Keep out of reach of children: Mennah® Oxygen is a powerful cleaning product that can be harmful if ingested. It is important to keep it out of reach of children to prevent accidental poisoning.
• Do not mix with other chemicals: Mennah® Oxygen can react with other chemicals to produce dangerous fumes. It is important to never mix Mennah® Oxygen with products containing chlorine, ammonia, or other chemicals.
• Avoid contact with eyes, skin, and inhalation: Mennah® Oxygen can irritate the eyes, skin, and respiratory tract. It is important to avoid contact with these areas when using Menna Oxygen.
• Dispose of unused solution: Mennah® Oxygen can be harmful to the environment. It is important to dispose of unused solution properly.
• Test on a small area before use: It is always a good idea to test a new cleaning product on a small area before using it on a large surface. This will help to ensure that the product does not damage the surface.